なんとか起動しました。(Normal Kernel with GCC 3.2.3)

昨日騒いでいた、Kernelの例外はUSB周りだったみたい。
initで処理するUSB周りを全て停止したら無事コンソールは起動した。
以下、dmesg(ユーザ名およびマシン名は恥ずかしいので変えています。)

Linux version 2.4.18-rmk7-pxa3-embedix-021129 (xxx@xxx) (gcc バージョン 3.2.3) #7 Mon, 17 Sep 2007 23:37:38 +0900
CPU: Intel XScale-PXA255 revision 6
Machine: SHARP Shepherd
Converting old-style param struct to taglist
Memory clock: 99.53MHz (*27)
Run Mode clock: 199.07MHz (*2)
Turbo Mode clock: 398.13MHz (*2.0, active)
Security risk: creating user accessible mapping for 0x08000000 at 0xf1000000
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 mtdparts=sharpsl-nand:7168k@0k(smf),54272k@7168k(root),-(home) jffs2_orphaned_inodes=delete                
Console: colour dummy device 80x30
Calibrating delay loop... 397.31 BogoMIPS
Memory: 64MB = 64MB total
Memory: 62164KB available (1770K code, 520K data, 76K init)
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
RCSR = 6
full reset !
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.14)
FCS : CCCR = 161
batok installed
Starting kswapd
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications AB.
reset resolution unkown => 480x640
Console: switching to colour frame buffer device 80x30
fb0: W100FB frame buffer device
keyboard initilaized.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
SharpSL serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0xf8100000x (irq = 14) is a 16550A
ttyS01 at 0xf8700000x (irq = 12) is a 16550A, using IRDA
ttyS02 at 0xf8200000x (irq = 13) is a 16550A
rs_init: IRDA H/W initializaion
sharpled_init: done.
corgi remote controller
Cotulla Real Time Clock driver v1.00
Cotulla Touch Screen driver initialized
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
loop: loaded (max 8 devices)
PPP generic driver version 2.4.1
PPP BSD Compression module registered
ide_cs.c 1.26 1999/11/16 02:10:49 (David Hinds)
Corgi audio driver initialize
Sharp SL series flash device: 1000000 at 0
Using static partision definition
Creating 1 MTD partitions on "sharpsl-flash":
0x00120000-0x007f0000 : "Filesystem"
NAND device: Manufacture ID: 0xec, Chip ID: 0x79 (Samsung K9D1G08V0M)
Creating 3 MTD partitions on "Samsung K9D1G08V0M":
0x00000000-0x00700000 : "smf"
0x00700000-0x03c00000 : "root"
0x03c00000-0x08000000 : "home"
Linux Kernel Card Services 3.1.22
  options:  [pm]
Intel PXA250/210 PCMCIA (CS release 3.1.22)
pxa_pcmcia_init(0)
pxa_pcmcia_init(1)
orinoco.c 0.12 (David Gibson <hermes@gibson.dropbear.id.au> and others)
hermes.c: 7 Jun 2002 David Gibson <hermes@gibson.dropbear.id.au>
orinoco_cs.c 0.12 (David Gibson <hermes@gibson.dropbear.id.au> and others)
spectrum_cs.c 0.3.4
Backlight Driver Initialized.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
IrCOMM protocol (Dag Brattli)
cramfs: wrong magic
FAT: bogus logical sector size 480
VFS: Mounted root (jffs2 filesystem) readonly.
Freeing init memory: 76K